Epson 61p Benutzerhandbuch

The projection lamp typically lasts for about 2000 hours of use 
(in high brightness mode) or 3000 hours (in low brightness mode). It 
is time to replace the lamp when: 

■

The projected image gets darker or starts to deteriorate.

■

The 

 lamp light is flashing orange. 

■

The message 

Replace the Lamp 

appears on the screen when the 

lamp comes on. To maintain projector brightness and image 
quality, replace the lamp as soon as possible.

Contact your dealer or call Epson at (800) 873-7766 in the United 
States for a replacement lamp. Request part number V13H010L30.
In Canada, please call (800) 463-7766 to locate a dealer. 

Follow these steps to replace the lamp:

1. Press the P Power button twice to turn off the projector. When 

you hear the projector beep twice, unplug the power cord.

2. If the projector has been on, allow it to cool down for at least an 

hour (or until the lamp is cool). 

3. Use the screwdriver included with the replacement lamp to loosen 

the screw holding the lamp cover (the lamp cover is located on top 
of the projector).

4. Slide the cover out, then lift it off.

You can check to see how 
many hours the lamp has 
been used. See page 61.