Epson 7850p Produktdatenblatt
EPSON PowerLite 7850p Projector
20
-
EPSON PowerLite 7850p Projector
6/03
The following tables explain the status, video source, and error
icons.
icons.
Controlling Your Projectors
The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you’ve selected the
projector(s) you want to operate before clicking one of the
buttons.
screen let you turn the projectors on and off and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you’ve selected the
projector(s) you want to operate before clicking one of the
buttons.
Note: To turn on a projector when it’s in standby mode (plugged in
but not projecting), first select
but not projecting), first select
Network ON
as the
Standby
Mode
setting in the projector’s Advanced1 menu.
Configuring the Monitoring Interval
If you need to have the most current status information about
your projectors, click the
your projectors, click the
Refresh
button on the EMP
Monitor screen.
You can also select how often EMP Monitor checks the
projector status:
projector status:
1. From the Tool menu, select
Configuration
. You see this
screen.
Note: If you want EMP Monitor to run whenever you start
your computer, click
your computer, click
Add to Startup
.
2. Select the desired update interval and click
OK
.
Status icons
(green)
Projecting; no problems
(dark)
Turned off; no problems
(green)
Projecting; problems detected
(dark)
Turned off; problems detected
Network error (for example, not connected to
network or power cable disconnected).
network or power cable disconnected).
You may also see this error if
Network OFF
is selected in
Standby Mode
.
Video source icons
Computer
BNC
S-Video
Video
DVI
Error icons
Lamp replacement notification (the lamp is
nearing the end of its life; see page 22)
nearing the end of its life; see page 22)
High-speed cooling in progress (the
projector is getting too hot but continues to
operate)
projector is getting too hot but continues to
operate)
Overheating (projection turned off
automatically)
automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem
Control buttons