Lorex lsc001 Betriebsanweisung
STEP 5
CONNECTING THE DEVICE TO A PC OR LAPTOP
(NOT INCLuDED)
DID YOu KNOW?
STEP 6
2
Connect the uSB Cable:
Insert one end of the
included USB cable to the
USB port of the device
and the other end to the
USB port of your PC or
laptop.
3
Driver Installation:
The computer will
recognize the newly
added hardware and
install the necessary
driver.
LSC001 Quick Setup Guide - English - R1
STORAGE & BATTERY LIFE
STEP 4
1
Storage Basics:
a) This device has 2GB standard memory.
b) It also offers microSD card* slot for extended memory.
c) In the default saving mode, if microSD card is inserted,
data will be saved to the SD memory built-in flash
memory.
d) When the memory is full, the LED light will stop blinking
and start data saving; If the built-in memory is full, the
device will turn off after saving data.
e) Pull out the microSD card when the device is turned off to
avoid data loss or damages to the device or microSD card.
Note: You may need to format the microSD card (*not
included) before using. Check the instruction manual that
came with your card for full details.
2
Battery Life:
a) If the device fails to start, it is likely that the battery is
out and needs to be recharged.
Note: For initial three charges make sure to charge the
li-polymer battery for 12 hours to ensure best
performance. Do not charge it over 24 hours.
b) Charge the battery using USB cable or using the
included AC adapter. Usually a full charge requires
3-4 hours.
c) The red LED lights will turn on when the device is
recharging and will turn off when the battery is fully
charged.
d) If you haven’t used the device for a long period of time,
recharge the battery first before using it.
e) It is better to charge the battery in power-off mode for
faster recharge.
Minimum System Requirements:
Operating System
Windows 98™, ME™, 2000™, XP™, Vista™
Ports
USB
1
Turn ON the Device First:
Turn the device ON.
The green LED lights up.
Note: Connect the USB
Cable only after turning
ON the device.
4
Once the driver is
installed, you will see a
new folder called “Video”
with all the recorded
video files.
View/Copy the Recorded Video:
5
Open the “Video” folder to
view the recorded videos.
Note: Video files by default
open with QuickTime. Files
are saved in 3GPP video
file format.
6
Right click on the file
name to copy, cut or move
the video file to a preferred
drive location.
Power ON/OFF
Record Video using the SD card from your
Cell Phone:
1
2
3
*Most common cell phones with a microSD card
slot and 3GPP video file format:
Nokia
Sony Ericsson
Blackberry
Motorola
Sharp
Sony Ericsson
Blackberry
Motorola
Sharp
Toshiba
Eten
NEC
Panasonic
Sanyo
Eten
NEC
Panasonic
Sanyo
PC Viewing:
4
Remove the microSD card
from your cell phone*.
Insert the microSD card
Insert the microSD card
from your cell phone to the
microSD card slot in your
device and press the ON
button to power it ON. Wait
for the blue LED to stop
flashing. Press the Record
button to record the video.
Once the video recording is
done, remove the microSD
card from the device and put
it back on your cell phone.
Power ON your cell phone
and look for the folder
where the videos are by
default saved. Use the video
playback options to view the
recorded video.
You can upload and share
You can upload and share
recorded videos on websites
such as YouTube.