Lorex lh310 Betriebsanweisung

LH310 Series Quick Setup Guide - English - R1

1 x EDGE DIGITAL VIDEO RECORDER WITH PRE-INSTALLED HDD*

1 x USB MOUSE

1 x POWER ADAPTOR

1 x DVI/VGA ADAPTOR (8/16-channel only)

1 x FLEX IR EXTENDER

1 x REMOTE CONTROL**

1 x ETHERNET CABLE

1 x MOUNTING KIT

1 x INSTRUCTION MANUAL

1 x QUICK START GUIDE

1 x DOCUMENTATION CD 

Network Ready, H.264 High Performance Digtial Video 

Surveillance Recorder

• * Channel/ Port configuration and HDD (hard disk drive) capacity may

   vary by model. Check your package for specific content information.

• **Remote control included with the system may vary depending on model.

• Monitor and Cameras are not included.

• Broadband Router and Computer are required for local and 

   remote monitoring (not included).

• For detailed setup and software information, please refer to 

   your printed User’s manual (included).

Information in this document is subject to change without notice. As our products are subject 

to continuous improvement, Lorex Technology INC. and our subsidiaries reserve the right to 

modify product design, specifications and prices, without notice and without incurring any 

obligation. E&OE © 2009 LOREX. All rights reserved.

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Time: 20 Minutes Hand Tools Skills - Easy

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Time: 20 Minutes Skills - Easy

The LH310 Series Edge DVR is designed to mount securely 

to the back of LCD monitors with a VESA mount. However, if 

desired, you can also leave the DVR in a standard horizontal 

position.

ATTENTION: YOU CAN ONLY MOUNT THE EDGE DVR TO AN 

LCD MONITOR WITH A VESA MOUNT AND AN INDEPENDENT 

STAND.

Screw the provided 

mounting screws 

into the two top 

holes in the rear 

panel of your LCD 

monitor. Make sure 

the screws are only 

3/4 of the way in; this 

will allow sufficient 

clearance to hang 

the Edge DVR.

Carefully place the Edge DVR 

(front panel facing up) over the 

screws and slide down into 

place.

Connect a USB mouse to the 

USB port on the rear panel of 

the Edge DVR.

Connect the power cable to the 

DC 12V port on the rear panel of 

the DVR. At startup, the system 

performs a basic system check and 

runs an initial loading sequence. 

After a few moments, the system 

loads a live display view.

The system has the following user authorities:
• ID 1—normal user: Has full control of the system, but cannot
   change passwords or enable/disable password checking.
   Default password: 1111

• ID 2—administrator: Has full control of the system but can 
   change both administrator and user passwords and enable/
   disable password checking. Default password: 2222
   By default, when you first startup your system, you will be 
   logged in as ID 2

.

1. Click 

 to open the Main Menu.

2. Click 

 to open the Setup menu.

3. Click Date/Time Setup and configure the following options:

•  Date Mode: Use the scroll wheel to select Y/M/D, D/M/Y, or

    M/Y/D.

•  Date: Use the scroll wheel to manually enter the date.

•  Time: Use the scroll wheel to manually enter the time.

4. Click Exit/Update. The new date and time are saved; the 

     system returns to the Setup menu.

5. Right click 

 to exit until all menus are closed. The date

     and time will appear on the bottom-left corner of the screen.

Press the 

 button on the remote 

control to open the Main Menu.

1. MENU: Opens the system main menu.

2. 

: Press to open the Split-Screen

    Selection menu (8 / 16-channel only).

    From full-screen single channel view, 

    changes display view to Quad 

    split-screen (4-channel model only).

3. /CH+: Move cursor in menus up; 

    Channel Up.

4. /FWD: Move cursor in menus right; 

    during playback, increase forward 

    playback speed (5X, 15X, 60X).

5. /REW: Move cursor in menus left; 

    during playback, increase reverse 

    playback speed (5X, 15X, 60X)

6.  / II: Start/pause forward playback.

7. /CH-: Move cursor in menus down; 

    Channel down.
8. 

:Confirm menu selections.

9. ESC: Go back / exit menus.

10. OSD: Show/hide the on-screen display.

11. LIST: Open the Event List menu.
12.  : While in Event List menu, press to

      delete a selected event (no confirm or 

     undo).
13.   : Decrease value of selected menu 

      option.
14.  : Increase value of selected menu 

      option.

• Left-Button: Click to select a menu option;

   while in Quad mode (Live View or 

   Playback), click on channels 1, 2, 3, or 4 to

   view the selected channel in full-screen.

• Right-Button: Click to return to previous 

   menu; exit menus/modes.

• Scroll-Wheel: Scroll up/down to change 

   values in selected menu options; position 

   markers in playback bar.

1

2

3

Connect one end of the Ethernet 

cable (for remote monitoring) to 

one of the router’s (not included) 

LAN ports and the other end to 

the DVR’s Network Port.

Connect BNC cameras to the BNC 

ports on the rear panel.

Congratulations! You have completed 

STEP 1 & 2 successfully. Your DVR is now 

ready to use. Refer to the owner’s manual 

to learn how to record, playback, use the 

search features and all other features 

available with this DVR. 

This step relates to remote viewing over the LAN (local area network)

by using a pc located on the same network as that of the DVR.

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Time: 20 Minutes Hand Tools Skills - Easy

Time: 30 Minutes

Skills - Intermediate

Hardware 

PC/Router

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

For detailed setup 

information, please 

refer to your included 

User’s Manual. For 

additional information, 

please visit our website             

Connect the VGA / DVI cable (not included) 

from your LCD monitor to the VGA port (4 

CH) / DVI port (8/16 CH only) on the rear 

panel of the system.

*NOTE: Make sure all cameras and 

cables are properly connected prior to 

powering on the system.

1. Camera, 2. Setup, 3. Record, 4. Alarm

5. Backup, 6. LAN

TIP: When navigating menus: Left 

mouse button: Click to select menu 

options. Scroll-Wheel: Scroll up/down 

to change values for selected options.

Record the IP and MAC Addresses in the section below:
IP ADDRESS :            .             .            .

MAC ADDRESS :          :           :          :           :          :

(Required for DDNS registration)

1.Press the   button twice on the remote control.

   OR

1. From the main Menu, click 

 , and then click Information. 

    Your IP address and MAC address are under LAN.

2. To exit, right-click or click 

 until you return to the main screen.

Connect the Flex-IR extender to the 

port on the rear panel of the DVR. 

Position the Flex-IR extender near the 

front of your monitor, or where it will 

receive a clear signal from the remote 

control.

Before using DVR Netviewer, you must configure settings in 

QuickTime® (4-channel only). QuickTime is required for DVR 

Netviewer to function properly. If not already installed on your 

system, download QuickTime from www.apple.com/quicktime

NOTE:  It might be necessary to change the IP address of the DVR to 

match the IP address of your local network. For more details, please 

see Appendix B: Setting up Local and Remote Viewing in the LH310 

Instruction Manual.

You must configure QuickTime prior to using DVR Netviewer for the 

first time (4-channel only).

To configure QuickTime:

1. With QuickTime installed on your system, open QuickTime 

    by double-clicking the QuickTime icon on your desktop or 

    selecting Start>Programs>QuickTime>QuickTime Player.

2. From the QuickTime Player main window, select Edit>

     Preferences>QuickTime Preferences.
3. From the QuickTime Preferences window, click the Advanced 

     tab.
4. Under Transport Setup, select Custom. The Streaming 

    Transport window opens.

5. Under Transport Protocol, select HTTP.

6. Under Port ID, select 80 and click OK. The Streaming 

    Transport window closes.

7. From the Preferences window, click Apply, and then click OK.

**Remote control included with the system

    may vary depending on model.