Argus dcm-098 Benutzerhandbuch

8

You will hear a beep and camera takes a photo.  The number 

displayed on the LCD screen will decrease by one.  If the bright-

ness is too low, the camera will beeps twice indicating insufficient 

lighting.

The camera goes into sleep mode automatically after 30 seconds of 

inactivity.  If it is not connected to a computer via the USB cable, you can 

manually turn it to sleep mode by pressing the MODE button until “      ” is 

shown on the LCD screen.  Press the shutter button to confirm.

Press the MODE button until the LCD screen displays the “      ”.   

Press the shutter button and the camera counts down for 10 sec. 

followed by short beep then gives off a long beep before taking a 

photo. 

AVI Mode 

Press the MODE button until the LCD display shows  “       ”.  Press 

and hold the shutter button and the camera will continuously 

capture for about 6 frames per second.