Archos jukebox studio Installationsanweisungen
- 9 -
PC USB Driver and MusicMatch™ Software Installation
Connecting Jukebox to PC & Adding MP3 Tracks to Jukebox
PC USB Driver Installation :
•
Pre6Install the USB Drivers (see following section) or do as following:
•
Turn on your computer and wait until it has finished booting.
•
Gently connect one end of the USB cable to the Jukebox.
•
Turn on the Jukebox. ARCHOS power adaptor may be required if there isn’t enough power
from the batteries.
from the batteries.
•
Connect the other end of the USB cable to a free USB port on computer.
•
A "Welcome to the Found New Hardware Wizard"(Win98se/2000) appears.
•
Click on the Next button
•
Select the Recommended option to search for best driver, and click Next
•
Insert the included Jukebox software CD into your CDROM drive.
•
Specify your CD-ROM Player and add \drivers\ for example d : \drivers\
•
Click Next again when new hardware is found, and follow the on-screen instructions to
complete the installation.
complete the installation.
•
Click Finish when prompted.
•
You will recognize an additional drive letter is added for the Jukebox
Note : If your Jukebox hard disk is not recognized, please refer to Trouble Shooting
Note : If your Jukebox hard disk is not recognized, please refer to Trouble Shooting
•
Drag and Drop, or Copy and Paste your MP3 tracks to the Jukebox hard disk drive letter.
Click on the "peripheral" icon in the system tray
Click on the pop-up windows asking for removal
Wait until a message says removal is OK
Click on the pop-up windows asking for removal
Wait until a message says removal is OK
•
Disconnect the USB cable on both ends, and Play the MP3 Tracks (as shown in the above
steps)
steps)
USB Cable – Both ends are
identical. Connect to the
Jukebox and Computer to
upload MP3
USB
DC Input
Line In