Argus qc-3195b Benutzerhandbuch
18
Battery level is low - When the battery indicator does
not show a fully charged battery, the voltage is too low
for the flash to work. Please change batteries.
Image is blurred / out of focus
Subject is out of focal range. Ensure that there is at least
1.5m ( 5ft ) between the camera lens and subject.
Camera moved during the shot- Hold the camera steady
while taking the picture. When flash is on, hold the
camera steady until flash has fired twice( The first flash
is to reduce red-eye and to detect the brightness of the
target.)
Computer does not recognize camera for Windows
98SE,
The camera driver has to be installed before picture
download. In picture preview mode, ensure that USB
mode is set to MSDC before connecting the camera to
the computer. For Windows 2000/ ME /XP, the camera
is recognized as a plug -&-playable, removable flash
disk without driver installation under MSDC mode.
It is recommended that you disconnect your digital
camera from your computer after use.
Subject in recorded image is too dark
Insufficient light for shooting Set the flash On, or adjust
the exposure compensation to a positive (+) setting.
Flickering on lcd screen or recorded image
Incorrect frequency setting Check the correct anti-flicker
frequency ( 50Hz or 60Hz ) under fluorescent light
setting.
Picture download problem
Flash disk does not display images recorded. The
camera will load two removable flash drives on your
computer under MSDC mode. The first drive is the
external SD or MMC cartridge and the second drive is
the recorded images saved in the built-in memory of the
camera. In cases when the removable flash drive names
coincide with those already assigned by the computer