Gateway 310 aafes Betriebsanweisung
171
Troubleshooting
www.gateway.com
Your fax communications program only sends and receives faxes at
14,400 bps even though you have a 56K modem
14,400 bps even though you have a 56K modem
Current fax technology only supports a maximum send and receive rate of
14,400 bps.
14,400 bps.
The modem is not recognized by the computer
■
Make sure that the line connected to the modem is working and plugged
into the appropriate jack on the modem. Use the setup poster to make sure
that the connections have been made correctly.
into the appropriate jack on the modem. Use the setup poster to make sure
that the connections have been made correctly.
■
If the modem shares the telephone line with another device, make sure
that the telephone line is not in use (for example, someone is on the
telephone, or another modem is in use).
that the telephone line is not in use (for example, someone is on the
telephone, or another modem is in use).
■
Use the modem cable that came with your computer. Some telephone
cables do not meet required cable standards and may cause problems with
the modem connection.
cables do not meet required cable standards and may cause problems with
the modem connection.
■
Shut down and restart your computer.
■
Run Windows modem diagnostics.
To run modem diagnostics:
1
Close all open programs.
2
Click
Start
, then click
Control Panel
. The Control Panel window opens.
If your Control Panel is in Category View, click
Printers and Other
Hardware
.
3
Click/Double-click the
Phone and Modem Options
icon, then click the
Modems
tab.
4
Click to select your modem, then click
Properties
. The Modem
Properties dialog box opens.
5
Click the
Diagnostic
tab, then click
Query Modem
. If information
about the modem appears, the modem passed diagnostics. If no
modem information is available, if a white screen appears with no
data, or if you get an error such as port already open or the modem
has failed to respond, the modem did not pass diagnostics.
modem information is available, if a white screen appears with no
data, or if you get an error such as port already open or the modem
has failed to respond, the modem did not pass diagnostics.