Gateway dc-t20 Betriebsanweisung
13
Getting Started
You use 2 AA size batteries (Alkaline, Ni-MH or Lithium) to power the camera.
Installing Batteries
1. Make sure the camera is turned off.
2. Slide the battery/card cover.
2. Slide the battery/card cover.
3. Insert the batteries, noting correct polarity (+ and -).
4. Close the battery/card cover firmly.
4. Close the battery/card cover firmly.
Note:
If you will not be using the batteries for an extended period of time, remove them from the
camera to prevent leakage or corrosion.
Never use manganese batteries.
Never use batteries of different types (together) or mix old and new batteries.
Avoid using batteries in extremely cold environments as low temperatures can shorten the
battery life and reduce camera performance.
camera to prevent leakage or corrosion.
Never use manganese batteries.
Never use batteries of different types (together) or mix old and new batteries.
Avoid using batteries in extremely cold environments as low temperatures can shorten the
battery life and reduce camera performance.
IM±Æª©GAT.p65
92/7/30, ¤W¤È 09:46
13