Gateway 210 Betriebsanweisung
29
Operating the projector
www.gateway.com
Operating the projector
After you have connected all components to the projector, you are ready to
begin using the projector.
begin using the projector.
Starting the projector
To start the projector:
1
Press the power button. The power LED displays steady green.
2
Turn on the connected components.
After all components are running, allow about 30 seconds for the display
image to appear. If the power LED is not steady green or you do not see
a display image, check the connections. For more troubleshooting
information, see “Troubleshooting” on page 41.
image to appear. If the power LED is not steady green or you do not see
a display image, check the connections. For more troubleshooting
information, see “Troubleshooting” on page 41.
3
Use the focus ring and zoom wheel to adjust the display.
You can also use the on-screen display (OSD) to make additional display
setting adjustments if necessary. For more information, see “OSD options”
on page 30.
setting adjustments if necessary. For more information, see “OSD options”
on page 30.