Gateway 2100 Betriebsanweisung
16
Gateway Solo™ 2100 Multimedia Notebook
To check/change the power button setting:
1. Turn the system on.
2. Press the F2 key when you see the message
Press <F2> to access
SETUP
in the lower left corner of the display, before Windows 95 loads,
to access the Setup menus. The system beeps, then the
Main
menu
appears.
3. Using the Right Arrow key, move to the
Power
menu.
4. The first available option is
Power button mode:
. If the setting displayed is
the one you want, go to Step 6.
5. Press the Spacebar to change the setting.
6. Press the ESC key to access the
Exit
menu.
7. Press
Enter to
Save changes & exit
, then press Enter again, or use the
Down Arrow key to select any other option.