Gateway 710x Betriebsanweisung
208
Chapter 11: Upgrading Your Computer
www.gateway.com
7
Install the new card into the add-in slot. You can slightly seesaw the card
end-to-end to help insert the card, but do not bend the card sideways.
end-to-end to help insert the card, but do not bend the card sideways.
8
Secure the add-in card with the retention screw.
9
. See the add-in card documentation for further
instructions.
10
Close the case by following the instructions in
11
See the documentation that came with the add-in card for any special
software installation instructions.
software installation instructions.
Installing memory
When you upgrade the computer memory, make sure that you install the
correct type of memory module for your computer. Your computer uses DIMM
memory.
correct type of memory module for your computer. Your computer uses DIMM
memory.
To install or replace DIMM memory:
1
Remove the side panel by following the instructions in
2
For more stability, place your computer on its side. To avoid scratching
the case, place it on a towel or other non-abrasive surface.
the case, place it on a towel or other non-abrasive surface.
Warning
Do not touch the contacts on the bottom part of the add-in
card. Touching the contacts can cause electrostatic
damage to the card.
card. Touching the contacts can cause electrostatic
damage to the card.