Gateway fx7020 Verweisanleitung
www.gateway.com
95
Power
Your computer will not turn on
•
Make sure that the power cord is connected to an
AC power source and to your computer, and that your
computer is turned on.
AC power source and to your computer, and that your
computer is turned on.
•
If your computer is plugged into a surge protector, make
sure that the surge protector is connected securely to a
power outlet, turned on, and working correctly. To test
the outlet, plug a working device, such as a lamp, into
the outlet and turn it on.
sure that the surge protector is connected securely to a
power outlet, turned on, and working correctly. To test
the outlet, plug a working device, such as a lamp, into
the outlet and turn it on.
•
Make sure that the power cord is free from cuts or
damage. Replace any damaged cables.
damage. Replace any damaged cables.
Printer
The printer will not turn on
•
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press.
an online/offline button that you may need to press.
•
Make sure that the power cable is plugged into an
AC power source.
AC power source.
The printer is on but will not print
•
Check the cable between the printer and your computer.
Make sure that it is connected to the correct type of port.
Make sure that it is connected to the correct type of port.
•
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press so
the printer can start printing. Press the button to put the
printer online.
an online/offline button that you may need to press so
the printer can start printing. Press the button to put the
printer online.
•
Check the cable for bent or broken pins.
•
If the printer you want to print to is not the default
printer, make sure that you have selected it in the printer
setup.
printer, make sure that you have selected it in the printer
setup.
To set a default printer:
1
Click (Start), then click Control Panel. The
Control Panel window opens.
Control Panel window opens.
2
Click Hardware and Sound, then click the Change
Default Printer option under the Printers category.
The Printer window opens.
Default Printer option under the Printers category.
The Printer window opens.
8512834.book Page 95 Wednesday, November 7, 2007 1:31 PM