Gateway uc78 Verweisanleitung

4 Slide the battery out of the notebook.

5 Slide a recharged battery into the notebook until

it snaps into place.

6 Slide the battery lock to the locked position.
7 Turn your notebook over.
8 Open the LCD panel.

Recalibrating the battery

If your notebook unexpectedly goes into Sleep mode

while you are using it but the battery charge is not

low, you may need to recalibrate your battery. You

should also recalibrate the battery periodically to

maintain the accuracy of the battery gauge.

To recalibrate the battery using BIOS:

1 Connect the AC adapter, then turn on your

notebook.

2 As soon as your notebook starts and you see a

startup screen, press F2. The BIOS Setup utility

opens.

3 Open the Advanced menu.
4 Highlight Battery Auto Learning, then select

Enabled by pressing the spacebar.

Important

Do not interrupt the battery recalibration process. If

recalibration is interrupted, you must start the process over again.

Important

Select models have the Battery Auto Learning utility

programmed into the BIOS. If your notebook does not have this

utility in BIOS, use the non-BIOS procedure.