Minox dc 6211 Benutzerhandbuch

1. Slide the mode switch to [   ].
2. Press the MENU button, and select the

[Function] menu with the   button.

[Function] menu is displayed.

3. Select the desired [Function] option item

with the   /   buttons, and press the SET
button to enter its respective menu.

4. Select the desired setting with the   / 

buttons, and press the SET button.

5. To exit from the menu, press the MENU button.

This sets the recording method at the time of capturing images.
* [Blank] Single:

Capture an image at a time.

* [ 

 ] Continuous:

Permits continuous photography of 3 images max.

* [AEB] AEB:

Permits 3 consecutive images in the order of standard
exposure, underexposure and overexposure
compensation.

* [ 

 ] Burst + flash

The “Burst+flash” capture mode lets you shoot a
sequence of 3 pictures with flash.

* [ 

 ] Burst

The “Burst” capture mode allows you to fully use the

available memory capacity (internal or via memory
card) by pressing and holding the shutter button. As
long as you hold the shutter button pressed, pictures
are captured until the memory capacity is exhausted.

Refer to section in this manual titled "Recording Voice Memos" for further
details.
* On / Off

When [Voice Memo] is set to [On], the preview setting is also fixed at
[On].

In [Continuous], [AEB], [Burst + flash] and [Burst] capture mode, the
voice memo is automatically fixed at [Off].