Airlinkplus asw105 Merkblatt

 

 

Package Contents 
l 

l 

l 

One Quick Installation Guide 

Congratulations on your purchase of the 5-Port 10/100M Mini Switch. 

This  switch integrates 100Mbps Fast Ethernet and 10Mbps Ethernet 

network capabilities in a highly flexible mini package. 

 

 

 

 

 

Ports 1-5 

At the rear site of the Switch, ports 1-5 are where you will 
connect your Computers to the Switch 

Power 

At the left site of the Switch, the power port is where you 
will connect the AC power adapter. Be sure to only use 
the AC power adapter that came with the Switch. 

 

The 5 UTP/STP ports support automatic 
MDI/MDIX crossover detection function 
gives true ‘plug and play’ capability, with 
the Auto-MDI function, you just need to 
plug-in the network cable to the switch 
directly and no need to care if the end node is NIC (Network Interface 
Card) or switches and hubs. 

 

Connect the Switch’s AC power adapter to the Switch’s 
Power port. Plug the other end of the adapter into an AC 
outlet. When connected the AC power adapter to the 
switch’s Power port and AC outlet will immediately 
power on this Switch. 

 

 

When the Switch installation was completed, check on the LED 
indicators for the status. 

POWER 

This indicator lights green when the switch is receiving 
power. 

Link/ACT  This indicator light green when the port is connected to a 

station, if the indicator blinking will be transmitting or 
received data on the network. 

 

Standards 

IEEE 802.3 10BASE-T 

 

IEEE 802.3u 100BASE-TX 

 

IEEE 802.3x Full-duplex flow control 

5 x UTP/STP Auto-MDIX ports 

Transfer Rate  Ethernet 10Mbps/20Mbps 
 

Fast Ethernet 100Mbps/200Mbps 

Performance  Non-blocking full wire speed 
Power 

7.5VDC/1A 

FCC Class B/CE Mark B/VCCI-B