Sony kdl-46v25l1 Betriebsanweisung

Wide Mode

Normal

Select to display in the original image size.

Full1

Select to enlarge the picture to fill the display area, keeping its original 
aspect ratio.

Full2

Select to enlarge the picture to fill the display area.

Wide Mode can also be accessed using the WIDE button on the remote control.

Reset

Resets the current setting to the default values, except Wide Mode and Power 
Management.

Auto Adjustment

Select to automatically adjust the display position and phase of the picture when the TV 
receives an input signal from the connected PC. Note that Auto Adjustment may not work 
well with certain input signals. In such cases, manually adjust the options below.

Auto Adjustment for PC can also be set using the TOOLS button on the remote 
control.

Phase

Adjust after Pitch to fine tune overall sharpness.

Pitch

Adjust uneven sharpness on screen.

For the PC Input Signal Reference Chart, see page 43.

Horizontal Center

Allows you to move the position of the picture left and right.
Press 

B/b

 

and press 

 to adjust.

Vertical Center

Allows you to move the position of the picture up and down. 
Press 

V/v

 

and press 

 to adjust.

Power Management

On

Select to automatically switch to the standby mode when there is no 
signal input for 30 seconds.

Off

Select to turn off Power Management.

Power Management is not VESA-compliant.