Star Micronics SP2000 Betriebsanweisung

– 14 –

ENGLISH

4 While observing the direction of the

roll, set the paper roll into the hol-
low as shown in Fig. 6-5.

5 Insert the edge of the paper into the

paper feeder. If inserted correctly,
the edge of the paper will pass
through the paper exit.

6 Insert the top edge of the paper into

the tear bar slot, then mount the cover
by reversing the procedure for re-
moving the cover in step 1 above.
Note: When the paper end mark ap-

pears on the paper, replace the
roll paper before it runs out.

Fig. 6-5 Setting the paper

Fig. 6-6 Loading the paper

Fig. 6-7

Roll paper

Tear bar

Paper feeder

Paper exit