Studiologic cms-61 Betriebsanweisung
Congratulations on purchasing the Computer Music Station CMS-61 and welcome to the world
of FATAR Keyboard Controllers.
The CMS-61 is the perfect choice of the musician looking for a simple yet versatile keyboard
controller to produce quality results in the multi-media environment.
The CMS-61 is the only keyboard controller on the market today to accomodate a computer
keyboard and mouse pad within the same product.
The CMS-61 is the perfect choice of the musician looking for a simple yet versatile keyboard
controller to produce quality results in the multi-media environment.
The CMS-61 is the only keyboard controller on the market today to accomodate a computer
keyboard and mouse pad within the same product.
TECHNICAL
CHARACTERISTICS • 61 unweighted keys
• One zone
• Velocity Sensitive
• Pitch Bend Wheel and Programmable Wheel
• Two Parallel MIDI Outputs
• Sustain Input Jack
• Volume Input Jack
• Program change, MIDI Channel, Transpose, Programmable wheel (Volume, Pan, Aftertouch,
• Velocity Sensitive
• Pitch Bend Wheel and Programmable Wheel
• Two Parallel MIDI Outputs
• Sustain Input Jack
• Volume Input Jack
• Program change, MIDI Channel, Transpose, Programmable wheel (Volume, Pan, Aftertouch,
Pitch, Modulation) etc.
• External Adapter 9V DC 500ma included
• Dimensions: 51 3/4" X 13 3/4" X 4 1/2" 48 Ibs.
• Dimensions: 51 3/4" X 13 3/4" X 4 1/2" 48 Ibs.
CONNECTIONS
1. Connect the AC/DC adapter cable to the power input jack, in the back of the controller, located
next to the power switch.
2. Make sure that the AC/DC adapter corresponds to the correct voltage output. The CMS - 6l will
accept an adapter that has a rating of 9V DC with a positive polarity tip and has a minimum
current of 200 mA.
current of 200 mA.
3. Connect MIDI cable from the CMS - 6l MIDI outputs, (each output can handle up to four
synthesizers, modules, or effect devices) to the MIDI input on your sound sources. Set your
sound sources to the desired MIDI channelsby the CMS - 6l. Each channel would normally be
assigned to a different sound or effect. Since the CMS - 6l has only one zone, you can only
program one of the l6 channels at a time. Make sure that your sound source is properly assigned
to the channel you are sending on.
sound sources to the desired MIDI channelsby the CMS - 6l. Each channel would normally be
assigned to a different sound or effect. Since the CMS - 6l has only one zone, you can only
program one of the l6 channels at a time. Make sure that your sound source is properly assigned
to the channel you are sending on.
4. To select a base channel hold the [CHANNEL[ switch and enter the channel number (1 through
l6) by depressing the appropriate black numbered key (0-9). The function switch must be
released after the black number keys. At this point the CMS - 6l is sending on that channel.
PROGRAM
CHANGE A program change command allows you to change the sound on your sound source from the
CMS - 6l. The program change will be sent on whichever MIDI channel the CMS - 6l is
currently set. Program changes are numbered 1 through 128. You may notice, depending on the
sound source, that a program change of 1 will show up on your sound source as 0. This is not a
problem, since MIDI is not completely standard between manufacturers. Thank the heavens that
there are only a few anomalies like this between the manufacturers.
currently set. Program changes are numbered 1 through 128. You may notice, depending on the
sound source, that a program change of 1 will show up on your sound source as 0. This is not a
problem, since MIDI is not completely standard between manufacturers. Thank the heavens that
there are only a few anomalies like this between the manufacturers.