Symbol mc9090g Betriebsanweisung
Accessories
6 - 3
Figure 6-2
Installing the Keypad
4.
Perform a warm boot.
Multi Media Card (MMC) / Secure Device (SD) Card
The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see
).
To insert the MMC/SD:
1.
Suspend the mobile computer.
2.
3.
Lift the MMC/SD retaining door.
4.
Position the MMC/SD, with the contacts down, into the MMC/SD holder. The MMC/SD corner notch fits into the
holder only one way. Snap the retaining door closed.
holder only one way. Snap the retaining door closed.
NOTE
SD cards are inter-operable with MMC cards and can also be used in MC909X mobile computers.
The following supports SD Memory Cards up to 2 GB:
MC909X with Windows Mobile 5.0 and OEM Version 01.39.0001
MC909X with Windows CE 5.0 and OEM Version 01.26.0001
MC909X with Windows CE 5.0 and OEM Version 01.26.0001
CAUTION
Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with
the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD. Proper ESD
precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is
properly grounded.
the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD. Proper ESD
precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is
properly grounded.