Symbol mc9090g Betriebsanweisung

Accessories 6 - 15

This section describes how to set up and use the snap-on CAM with the mobile computer. The CAM snaps on to 
the bottom of the mobile computer and can be easily removed when not in use.

When attached to the mobile computer, the CAM can perform the following functions.

Provides power for operating the mobile computer, with the appropriate power connection.

Provides serial connection through the serial pass-through port for communication with a serial device, such 
as a host computer.

Provides USB connection through the USB pass-through port for communication with a USB device, such as 
a host computer.

Charges the mobile computer’s battery, when used with the appropriate power supply.

To attach, snap the CAM onto the bottom of the mobile computer.

Latches

Power Port

Communications Port

Pogo Pin Pass-through 
Connector

Latch Grip

Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative 
power supply will void the product warranty and may cause product damage. See 

for the power supply regulatory compliance statement.

When a mobile computer with Windows Mobile 5.0 is connected to a host computer through the CAM and an 
ActiveSync connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a Microsoft 
security feature to prevent connection to two networks at the same time.