Epson Enhanced Adhesive Synthetic Paper 44" x 100' S041619 Merkblatt

Professional Media Fact Sheet

Adhesive Synthetic Paper 

EPSON Stylus

®

Pro 7500

EPSON Stylus Pro 9500

Adhesive Synthetic Paper is an ideal choice for signage that requires

adhesive backing. An affordable, polypropylene-base media, it’s thin,

light, and very flexible with a durable, wet-strength base. It delivers

accurate colors and vivid results on its high-quality matte surface. An

instant-drying paper, it’s excellent for indoor banners and outdoor

signage. When laminated, it’s perfect for outdoor signage applications

as well. Best of all, its adhesive backing makes it possible to remove

and reposition signage for easy mounting.

Like all of Epson’s innovative media, this paper is engineered to give

you the highest resolution and color saturation possible. Epson’s printer

driver software actually optimizes the amount of ink released onto the

page, based on the type of paper used. As always, EPSON supplies

guarantee EPSON quality.

Indoor/outdoor usage

Recommended for both

UV lamination is recommended for outdoor usage. 

Lightfastness

One year outdoors (laminated)

One year lightfast rating is laminated with a vinyl based UV film,
and is based on accelerated testing.

One month outdoors (unlaminated)

One month lightfast rating is based on an accelerated light test
with an actual rain test at 95% RH, 75˚F with a rain cycle of 
18 minutes every 120 minutes.

Archivability

Not recommended

Resistance to water

Good

Bleeding does not occur with incidental water contact. However,
surface lamination is recommended in wet conditions to protect 
the outer coating. The base is waterproof.

Ink drying time

Immediate

Ink is dry to the touch after printing. However, it takes 24 hours

(less than 30 seconds)

before it cures and becomes durable.

Lamination feasibility

Pressure sensitive; cold lamination only

A vinyl-based film that contains a UV absorbent is recommended 
for lamination purposes. For anti-graffiti purposes, use a fluoride-
based film (i.e. Tedlar™). For use in direct sunlight, avoid polyester
or polycarbonate film.

Surface adhesion

Flat surfaces only

For best results, apply the adhesive to a clean, flat surface.
And, test it before applying it to the final print. Stretching the
adhesive is not recommended, as the paper may shrink over time.

Adhesive backing

Re-positionable

Removable adhesive back provides enough strength and durability
for outdoor usage. However, strength will decrease with increased
re-positioning.

• Re-positionable adhesive for easy mounting 

• Block-out backing to eliminate show-through

• Non-glare surface for easy viewing

• 720 dpi printing for high-quality output

• Dries instantly for easy handling with Epson inks

• Water resistant coating for increased durability

NOTE: Actual print stability and longevity will vary according to image, display conditions, light intensity, humidity, atmospheric conditions, and post-printing treatments.

Epson does not guarantee stability or longevity. For maximum print life, display all prints under glass or lamination or properly store them.

8293 Epson  2/22/01  4:39 PM  Page 1