LG 456394 Benutzerhandbuch

Repeat pressing        button until 
    icon flash.

Press           button to select active vane : 
1 / 2 / 3 / 4 / All / Standard
Select Vane number using           buttons.
❈ Vane number : No. 1, 2., 3, 4, all, or 

standard
- Selected vane is in operation.  
- Please verify the operating vane.
- To set the angle of all the vanes, 

select 'all'.

- To set as the factory default settings, 

select 'standard'. 

Select wind angle using           button, and 
press       button.
- The boundary of wind angle settings can 

be changed to 5 levels or 6 levels 
according to the product.

- When selecting 'standard' for Vane 

number, the wind angle does not move.

Set the wind angles for the remaining 
vanes as the same as above.
❈ There are products with vanes with 

no. 1 and no. 2 only according to the 
product types.

Press       button to exit.
❈ After setup, it automatically 

gets out of setup mode if there 
is no button input for 60 seconds.

❈ When exiting without pressing set 

button, the manipulated value is not 
reflected. 

Press       button to complete and 
active the setting process. 
(Airflow direction function will be 
released whenever setting vane angle)

Press        button to exit or 
system will automatically release 
without any input after 25 
seconds.

This function is to adjust angle at which airflow is blow out.