LG HB6422BRU Betriebsanweisung

Having carried out the above adjustments, reassemble the 

appliance following, backwards, the instructions in paragraph “5.1 

Removing the hob”.

6.1 Regulation of minimum for natural gas
Replace the components on the burner and slide 

the knobs on the gas tap pins.

Light the burner and set it at minimum position.

Remove the knob and turn the regulation screw 

inside or next to the gas tap pin (depending on the 

model) until you get a suitable minimum flame.

Replace the knob and check burner flame stability: 

(rapidly turning the knob from maximum to 

minimum position, the flame should not go out).

6.2 Regulation of minimum for LPG
To regulate the minimum for LPG, completely tighten (clockwise) the 

screw inside or next to the gas tap pin (depending on the model).

The diameters of the by-passes for each burner are given in table 

“5.2 Regulation for LPG”.

After having regulated the device with gas other than the one 

tested, replace the label located on the guard with the one that 

corresponds to the new gas. The label is inside the bag that 

contains the nozzles provided.