LG 42LS75A-5B Benutzerhandbuch

10

OPS Hole Cover

Connector on 
the KT-OPSA

Connector inside the set

- For certain models only.

-  The image may be different according to the 

model.

1 

Lay a clean cloth on the floor, put the 
monitor on it with the screen facing 
downward, and then remove the screws 
from the OPS hole cover on the rear of the 
monitor with a screwdriver.

2

  Lift the left side (round part) of the OPS hole 

cover. Remove the cover.

3 

Align the KT-OPSA along the four screw 
holes on the rear of the set and attach it 
to the rear of the set using the four screws 
provided.

4 

Open the top cover of the KT-OPSA and 
connect the cable provided to the connector 
inside the set and the connector on the KT-
OPSA.

KT-OPSA