Omnitron iConverter 10T/2 8340-0 Merkblatt
Produktcode
8340-0
iConverter
iConverter
®
The
■
iConverter 10T/2 is an IEEE 802.3 compatible
10BASE-T unshielded twisted pair (UTP) to 10BASE-2
coax converter
Seamlessly connects 10BASE-T hubs via coax and
■
coax network segments to 10BASE-T hubs
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Management is available with the addition of a
■
management module to the chassis
Supports 50 ohm coax to a maximum distance of 185m
■
and 30 stations
Features a UTP crossover switch and automatic polarity
■
detection and correction
Features switch-selectable coax line termination for
■
convenience, space and cost saving
LED displays for immediate visual status of each port
■
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
10T/2
10BASE-T to 10BASE-2 Managed Ethernet Media Converter
The iConverter 10T/2 is a 10BASE-T to 10BASE-2 media
converter that converts between twisted pair (UTP) and coax
LANs and joins their collision domains. The iConverter 10T/2
facilitates the connection of a coax segment to a 10BASE-T
hub. When using a pair of iConverter 10T/2 converters back
to back, they can connect between two 10BASE-T hubs via
coax.
The UTP port has a modular EIA/TIA 568 RJ-45 connector that
The UTP port has a modular EIA/TIA 568 RJ-45 connector that
supports categories 3 to 5 wiring and connects to distances
up to 100m. The iConverter 10T/2 detects and corrects
wiring polarity reversals, and features a crossover switch that
facilitates a straight-through cable connection to a workstation
or a hub, eliminating the need for a crossover cable.
The coax port has a BNC connector and supports a 50 ohm
The coax port has a BNC connector and supports a 50 ohm
cable and distances of up to 185m. Per IEEE 802.3 standard,
up to 30 workstations can be attached to the coax segment.
The iConverter 10T/2 features a convenient and cost-effective
cable termination via a termination switch and a built-in
termination element.
The iConverter 10T/2 module is hot-swappable and can be
The iConverter 10T/2 module is hot-swappable and can be
mounted in a 19-Module (2U high) or 5-Module (1U high) rack-
mountable chassis (19-inch or 23-inch) with any combination of
redundant AC, 24VDC or 48VDC power supplies. It can also
be mounted in a 2-Module AC or 18 to 60VDC powered
chassis, or in a 1-Module AC/DC powered chassis.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Key Features