LG 42WS50MS-B Benutzeranleitung

Picture ID is used to change the settings of a 
specific display using a single IR receiver for multi-
vision. Communication is possible between a set 
with an IR receiver and other sets using audio 
cables. Each set is identified by a set ID. If you 
assign the Picture ID using the remote control, only 
displays with the same Picture ID and Set ID can 
be controlled remotely.

1

  Press the red ON button on the remote control 

to assign the Picture ID.

2

  If you press the left/right buttons or press the 

ON button repeatedly, the Picture ID cycles 
through OFF and 0 to 4. Assign the ID you 
want.

 

y

If you assign the Set ID to each set with 
multi-vision, and then assign the Picture ID 
using the red button on the remote control, 
the key command is displayed for the set 
with the same Set ID and Picture ID. A set 
with different Set IDs and Picture IDs cannot 
be controlled by IR signals.

 

y

For more information on how to assign the 
Set ID, see "Set ID" on page 47.

 

y

Please refer to the Installation Manual for 
more information on Total Set ID assignment.

 

y

For example, if the Picture ID is assigned to 
2, the upper right display (Set ID: 2) can be 
controlled by IR signals.

 

y

For each set, you can change the settings 
for the PICTURE, AUDIO, TIME, NETWORK 
and MY MEDIA menus or the hot keys on 
the remote control.

 

y

 If you press the green OFF button for Picture 
IDs, the Picture IDs for all sets are turned off. 
If you then press any button on the remote 
control, all sets will start working again.

 

y

Picture ID will be disabled while using the 
MY MEDIA menu.

Picture ID

Close

◀                    

Off

                    ▶

2X2 Multi-Vision (Total Set ID: 4)

Set IDs are assigned as shown in the picture.

Audio cable

Picture ID

Close

           Off