Omnitron iConverter OC12FF 8681-1 Benutzerhandbuch
Produktcode
8681-1
iConverter
iConverter
®
OC-12 multimode to single-mode fiber converter
■
Supports multimode, single-mode, and single-fiber
■
with SC connectors
Supports distances of 80km or longer*
■
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides
real-time port and module information, remote
parameter configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
LED displays for immediate visual status of each port
■
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
OC12FF
Multimode to Single-Mode Managed Media Converter
The iConverter OC12FF managed media converter provides
multimode to single-mode and dual to single fiber conversion,
and is a cost-effective solution for extending SONET/SDH
network distances.
iConverter OC12FF models are available with multimode,
iConverter OC12FF models are available with multimode,
single-mode, and single-fiber options. The single-mode fiber
port supports SC connectors and distances up to 80km. The
multimode fiber port supports SC connectors and distances
up to 550m.
The iConverter OC12FF features user-selectable Link
The iConverter OC12FF features user-selectable Link
Propagate and Remote Fault Detection modes to facilitate
quick fault detection, isolation and reporting.
The iConverter OC12FF is available as a compact, unmanaged
The iConverter OC12FF is available as a compact, unmanaged
standalone unit, or as a chassis plug-in module that can be
managed with a management module installed in the chassis.
The hot-swappable plug-in module can be mounted in a
high-density 19 or 5-Module chassis with any combination of
redundant AC and DC power supplies. It can also be mounted
in a 2-Module AC or DC powered chassis, or in a 1-Module
chassis with AC or DC power input.
The standalone OC12FF can be wall-mounted and is DC
The standalone OC12FF can be wall-mounted and is DC
powered. It can be ordered with an external AC/DC power
adapter, or it can be directly powered using a 2-pin terminal
connector.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Key Features
*Contact Omnitron