Omnitron FlexPoint 10FL/T 4300-0 Merkblatt
Produktcode
4300-0
FlexPoint
FlexPoint
TM
FlexPoint
10FL/T
10BASE-FL to 10BASE-T Media Converter
The FlexPoint 10FL/T is a 10BASE-FL fiber to 10BASE-T
UTP media converter that provides reliable and cost-effective
network connectivity and fiber extension.
The UTP port auto-negotiates the duplex mode of the
attached device for plug-and-play installations. The port
detects and corrects wiring polarity reversals, and features
a crossover switch that eliminates the need for a crossover
cable and facilitates connectivity to network equipment such
as hubs, switches and workstations.
The fiber port operates at 850nm, 1310nm or 1550nm, and
features ST, SC or MT-RJ connectors. Multimode fiber models
support distances of up to 5km, and single-mode fiber models
support distances of up to 120km.
The FlexPoint 10FL/T supports Link Propagate, which is a
fault detection tool that provides a local indication of a remote
link loss by disabling the port and propagating the loss of link
from one port to the other.
The FlexPoint 10FL/T features descriptions of the LED
indicators on the label for easy in-the-field installation and
maintenance. The LEDs report the availability of power, port
activity and link status, speed and duplex modes.
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
can also be rack-mounted in a 5-Module shelf or in a high-
density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used
as standalone devices can be powered by an external AC to
DC power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options
provide flexible upgrade paths as network requirements
change and grow.
FlexPoint unmanaged media converters are easy to use
and provide dependable fiber connectivity in Enterprise and
Government networks around the world.
The FlexPoint 10FL/T is a 10BASE-FL fiber to
■
10BASE-T UTP media converter
UTP port automatically supports Full or Half-Duplex
■
Features a crossover switch for easy connection to
■
hubs, switches or workstations
Extends network distances up to 120km
■
Supports Link Propagate for the remote detection of link
■
faults
Supports most network interfaces with a wide variety of
■
cable and connector types
Labeled status LEDs for quick and easy installation
■
Wall-mount or rack-mount on a 5-Module shelf or in
■
a 14-Module power-redundant FlexPoint Powered
Chassis
Completely software independent with no installation of
■
drivers required
Peace-of-mind reliability backed by a lifetime warranty
■
and free 24/7 technical support
Key Features