Omnitron FlexPoint 1000FF 4440-1 Merkblatt
Produktcode
4440-1
FlexPoint
FlexPoint
TM
FlexPoint
1000FF
Single-mode to Multimode Fiber Converters for Gigabit Ethernet
The FlexPoint 1000FF is a protocol-independent fiber
converter that provides reliable and cost-effective extension
of network distances by connecting multimode fiber networks
or devices over single-mode fiber cabling.
No manual configuration is required with the plug-and-play
No manual configuration is required with the plug-and-play
FlexPoint 1000FF. Connect the fiber cables to the appropriate
interface and the installation is complete.
The fiber port operates at 850nm, 1310nm or 1550nm and
The fiber port operates at 850nm, 1310nm or 1550nm and
features SC connectors. Multimode fiber models support
distances of up to 550m, and single-mode fiber models
support distances of up to 80km.
Descriptions of the LED indicators are provided on the label
Descriptions of the LED indicators are provided on the label
for easy in-the-field installation and maintenance. The LEDs
report the availability of power and the detection of devices
attached to the fiber ports.
FlexPoint modules can be mounted utilizing optional wall-
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
can also be rack-mounted in a 5-Module shelf or in a high-
density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used
FlexPoint modules installed in the 5-Module shelf or used
as standalone devices can be powered by an external AC to
DC power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options
provide flexible upgrade paths as network requirements
change and grow.
FlexPoint unmanaged media converters are easy to use
FlexPoint unmanaged media converters are easy to use
and provide dependable fiber connectivity in Enterprise and
Government networks around the world.
The FlexPoint 1000FF is a single-mode to multimode
■
protocol-independent fiber converter
Plug-and-play installation requires no manual
■
configuration
Supports auto-negotiation of duplex mode
■
Extends network distances up to 80km
■
Supports most network interfaces with a wide variety of
■
cable and connector types
Labeled status LEDs for quick and easy installation
■
Wall-mount or rack-mount on a 5-Module shelf or in
■
a 14-Module power-redundant FlexPoint Powered
Chassis
Completely software independent with no installation of
■
drivers required
Peace-of-mind reliability backed by a lifetime warranty
■
and free 24/7 technical support
Key Features