Sony HES-V1000 Handbuch

z

• You can check the current software version. Press HOME, and select 

[Settings] - [System Settings] - [Device Information].

• A new mail will be stored in [Massages] notifying that the update was 

successful.

a Press HOME to turn on the Home Menu.

b Select 

c Select 

d Select [Software Update] and press ENTER.

e Select [Disc Update] and press ENTER.

A message appears asking you to insert a software 
update disc.

f Insert the update disc by pressing Z. 

The display asks for confirmation.

g Select [Yes] and press ENTER.

Software update starts.
On the top or front panel display, “VERSION UP” 
appears, and then messages such as “VERSION UP 
XX%” appear indicating the progress.
When successful, “VERSION UP FINISH” is 
displayed, and the disc will be ejected.

• Repeat the above steps if the update fails as follows:

– “VERSION UP FAIL” appears and the disc is 

ejected.

h Remove the disc.

The server will start up with the updated software 
from the next time.

• Call “Home Entertainment Server” Customer Call Center (1-877-531-

SONY (7669)) if an error message appears during software update.

• The server may automatically re-start a few times depending on the 

updated content.

• Software update service may be discontinued without a prior notice.

System Settings

Settings

Software Update

Set Password

All Media Guide Settings

Device Information

 

Settings

Bright

Brightness of Front Panel

Off

Standard

On

HDMI Control

Standby Mode

Audio Display

Update Methods

Select a software update method.
When selecting [Network Update], you will need to
configure the network settings.

Disc Update

Network Update

Confirm Software Update Disc

Cancel

System update will be performed.
Insert the designated update disc.

Confirm Version

Version update disc is inserted.
Do you want to update?
Current Version: 0.00.001
New Version:   0.10.030
Do not turn off System during an update.

Yes

No