Sony XAV70BT Handbuch

For details on compatibility of your device, visit 
the support site.

To capture your voice during handsfree calling, 
you need to install the external microphone XA-
MC10 (supplied).

For details on how to connect the microphone, 
see the supplied installation/connections manual.

Pairing is required only the first time you connect 
to a Bluetooth device (cellular phone, etc.).*

1

To pair this unit to a Bluetooth device, you need 
to enter the same passkey*

2

 on this unit and on 

the Bluetooth device. The passkey can be either 
your own selected number or the number 
determined by the Bluetooth device. For details, 
see the manual of the Bluetooth device.

*1 If you delete the device registration from this unit, 

*2 Passkey may be called “passcode,” “PIN code,” 

Check that the other Bluetooth device is set to 
allow for searching (discoverable) beforehand.

Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then 
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source 
List,” then “BT Audio.”

Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play 
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.

None: No device is connected for 
audio streaming purpose.
Flashing: Connection is in progress.
Lit: Connected to a device.

None: No cellular phone is connected 
for handsfree calling purpose.
Flashing: Connection is in progress.
Lit: Connected to a cellular phone.

Signal strength status of connected 
cellular phone.

Remaining battery status of connected 
cellular phone.

http://esupport.sony.com
http://www.sony.com/mobileAV

t