Sony CLM-FHD5 Handbuch

-GB

 Rotate the dial of the shoe 

adaptor fully in the 

 (LOCK) 

direction to fix it firmly to 
the camera.

When attaching to a camera 
read the instruction manual of 
the camera too.

Notes
• If using a camera equipped with a 

pop-up built-in flash, be careful of 
the following:

 

– Always close the built-in flash of 

the camera. If your camera has a 
built-in auto flash function, turn 
that function off.

 

– Before using the flash, remove 

this unit from the camera.

• Make sure this unit is firmly 

fixed to the camera before use 
to prevent this unit from falling 
during shooting.

 Connect this unit to the 

camera with the correct type 
of HDMI cable supplied.

• If the cable is not long enough, 

use a Sony HDMI cable (not 
supplied).

Notes

• When this unit is connected to 

the camera by the HDMI cable, 
the following may happen 
depending on the camera.

 

– No image appears on the 

camera’s LCD screen.

 

– The camera switches to 

playback mode. (Make sure 
the camera is in shooting 
mode before taking 
pictures.)

• After a certain time in either of 

the following conditions, the 
backlight of this unit turns off.

 

– No HDMI signal is output 

from the camera 

 

– The HDMI cable is 

disconnected