Sony CLM-FHD5 Handbuch
26
-GB
Video Level Marker
Displays the IRE level in green
that you choose from the
following, for the input image.
that you choose from the
following, for the input image.
1
Register [VLM] in the C1
button or C2 button of this
unit.
Register VLM pressing
[Advanced settings]
button or C2 button of this
unit.
Register VLM pressing
[Advanced settings]
[C1] or
[C2] (Page 22).
2
Choose the VLM level.
You can choose the level by
pressing [Advanced Settings]
[VLM].
Setting
90%/80%/70%/60%/50%
(Video signal level)
At higher settings, the green
level gets redder.
pressing [Advanced Settings]
[VLM].
Setting
90%/80%/70%/60%/50%
(Video signal level)
At higher settings, the green
level gets redder.
IRE
99
70
1
75
65
65
Example) Setting (70 %)
Red
Gray
Green
Gray
Blue
3
Press the C1 or C2 button
which [VLM] is registered in
the step 1.
The video level is displayed
in colors on the LCD screen of
this unit.
Pressing the same button in
step 3 or the MENU button
again will return the display to
the normal screen.
the step 1.
The video level is displayed
in colors on the LCD screen of
this unit.
Pressing the same button in
step 3 or the MENU button
again will return the display to
the normal screen.
Notes
• When using VLM, S-Log Disp.
• When using VLM, S-Log Disp.
Assist (Page 27) turns temporarily
[OFF].
[OFF].
• The numerical value of IRE is
tentative. It is recommended to
check the actual image.
check the actual image.