Sony PCV-J150 Handbuch
Removing, Installing, and Replacing Components
43
7
Slide the new drive into the drive holder and align the holes on each
side of the drive holder.
side of the drive holder.
8
Secure the drive to the drive holder using the two holes on each side
of the drive holder (screws are provided with the new drive). Do not
overtighten the screws.
of the drive holder (screws are provided with the new drive). Do not
overtighten the screws.
9
Connect the second drive connector to the new drive (see next
diagram).
diagram).
10
Connect the second power connector to the new drive.
11
Make sure the drive connector is connected securely to the
motherboard.
motherboard.
KY0083.VSD
Align
holes
holes
KY0085.VSD
Second power connector
Second drive connector