Sony PCV-RS100 Handbuch

The 6-pin i.LINK® port on the back panel of the system can supply power 
from the computer to an i.LINK device if the device also has a 6-pin 
i.LINK port. The 6-pin port supplies 10 V to 12 V and a maximum power 
of 6 watts. 

Refer to the documentation that came with your compatible i.LINK 
device for information on operating conditions and proper connections. 
Before connecting compatible i.LINK devices to your system, such as an 
optical disk or hard disk drive, confirm their operating system 
compatibility and required operating conditions.

The 4-pin i.LINK port at the bottom of the front panel does not supply 
power to an i.LINK device. 

The Ethernet port on the back panel of the system is used to connect to a 
10BASE-T/100BASE-TX Ethernet network. 

✍

i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 
connection. The i.LINK connection may vary, depending on the software applications, 
operating system and compatible i.LINK devices. All products with an i.LINK connection may 
not communicate with each other.

6-pin i.LINK port

(IEEE 1394)

On back of

system

4-pin i.LINK port

(IEEE 1394)

Behind lower

front panel

Ethernet

On back of

system