Sony PCV-RZ24G Handbuch

Seite von 100
Upgrading and Maintaining Components
39
Installing Memory Modules
Your system supports PC2700 DDR-SDRAM memory modules. The 
DDR-DIMM memory modules can be single- or double-sided and 
installed in either socket. 
1
Choose the size of the memory module and configuration as shown 
in the following table. Memory modules can vary in size and speed 
between sockets. The minimum memory size is 128 MB. The 
maximum memory size is 1.0 GB. The BIOS automatically detects the 
type, size and speed of the memory modules.  
2
If necessary, remove the memory module you wish to replace (see 
3
Remove the new memory module(s) from its anti-static package. 
Hold the memory module only by its edges to prevent 
static-electricity damage. 
4
5
*
 
!
Before opening the system unit, save and close all open files, exit all open 
applications, turn off the power to all attached peripheral devices, shut 
down the computer, and unplug the power cord.
Memory module configurations (MB)
*
* Your computer ships with at least 512 MB of memory and is expandable to 1.0 GB. Your model may 
ship with more than 512 MB SDRAM depending on the configuration you purchased.
DIMM1
DIMM2
0, 128, 256, 512
0, 128, 256, 512
 Use only PC2700 memory. Your system does not support EDO, buffered 
DDR-SDRAM, or PC100/133 SDRAM memory.
!
Touch any exposed metal portion of the chassis to discharge static 
electricity in your body before handling a memory module.
!
Do not remove the Giga Pocket™ card (located in PCI slot No. 3) unless 
directed by a service technician. The Giga Pocket card is a fragile 
hardware component.
* Applicable to PCV-RX models only.