Nikon AT-10 Transparency Adapter Benutzerhandbuch
2
Nikon
Transparency Unit User’s Manual
2. Unpacking
The optical assembly in the transparency unit is
held in place during shipment by an optical
assembly slider lock. The slider lock must be
unlocked before the unit will work properly, as
otherwise the optical system may be damaged
while scanning.
held in place during shipment by an optical
assembly slider lock. The slider lock must be
unlocked before the unit will work properly, as
otherwise the optical system may be damaged
while scanning.
Accessories
The following items are included with your
transparency unit. When you open the package,
please check whether all items are supplied. If
there are any missing items, please contact your
dealer immediately.
transparency unit. When you open the package,
please check whether all items are supplied. If
there are any missing items, please contact your
dealer immediately.
•
Transparency Unit (1)
•
Hinge Screws (2)
•
User’s Manual (1)
1. Introduction
Thank you for purchasing your Nikon trans-
parency unit.
parency unit.
This manual describes the steps from unpacking
to setting up the transparency unit and connect-
ing it to your scanner. Please read this manual
thoroughly to ensure proper operation of the
unit.
to setting up the transparency unit and connect-
ing it to your scanner. Please read this manual
thoroughly to ensure proper operation of the
unit.
For an explanation of how to scan and repro-
duce images using the ScanTouch scanner with
the transparency unit, please refer to the
software manual.
duce images using the ScanTouch scanner with
the transparency unit, please refer to the
software manual.
We hope that you find this manual helpful.