Nikon WP-CP5 (Coolpix S1/S3) Benutzerhandbuch

Check for Leaks

6

Before placing the camera in the case, be sure that the camera is function-
ing normally and that the case does not leak.  Failure to check for leaks 
before use could result in irreparable damage to the camera.  Note that 
leaks may result if the case is cracked or damaged.  Check the case for 
cracking and other damage before use, and consult with a Nikon service 
representative in the event that any cracking or damage is found.

Immerse the case
Slowly immerse the case in water, stopping if 
water enters the case.  Test the case in a shallow 
area (1 m / 3´ or less) or in a tub or bucket.  Do not 
use hot water, as this could exceed the operating 
temperature range of 0–40 °C (32–104 °F). 

Close the case
After making sure that the O-ring is in place, 
slowly close the case, being careful not to pinch 
your fi ngers in the gap.

Latch the case
With front and rear halves of the case lightly 
touching but the case not fully closed (

햲), fl ip the 

buckle onto the front half of the case (

햳).

Press the case closed until the latch clicks shut.  
Check that the case is properly sealed, that the 
O-ring is in place, and that no foreign objects are 
caught in the seal.