Nikon SB-26 Benutzerhandbuch

Seite von 75
37
36
Setting Up SB-26
Press the ı button.
To perform 3D Multi-Sensor Balanced or Multi-Sensor
Balanced Fill-Flash, 
confirm K appears in the LCD panel.
To perform Center-Weighted or Spot Fill-Flash, confirm
J
appears.
To perform Standard TTL Flash, press the ı button so
that  both K and J disappears.
Choose  p (flash mode selector). Confirm H in the
LCD panel.
Choose W position (flash sync mode selector).
q
position is used for Rear-Curtain Sync Flash (see
page 105).
Confirm the ISO film speed has been set and appears
in the SB-26’s LCD panel (automatic ISO film speed
adjustment).
If not shown in the LCD panel, lightly press the camera’s
shutter release button.
Confirm the aperture value chosen on the camera and
zoom-head position have been set and appear in the
SB-26’s LCD panel (automatic aperture/zoom-head adjust-
ment).
1
For
selecting
flash
method
2
Flash mode
selector at TTL
Auto
3
Flash sync
mode
selector at
NORMAL
4
ISO
speed of
film in
use
5
Aperture
value and
zoom-head
position
One of these marks appears for fully
automatic fill-flash; both disappear
for Standard TTL Flash
Chapter 
3
TTL Auto Flash Mode: For F5, F90X/N90s, F90-Series/N90 and F70-Series/N70 Users
Set Up and Practice
Some operations can be controlled automatically when the
camera is used with an AF Nikkor lens (including the latest
D-Type) or Nikkor lens having a built-in CPU. In other cases,
operate manually.
The following instructions describe a situation where you
are using either a D-type Nikkor to operate 3D Multi-Sensor
Balanced Fill-Flash, or an AF Nikkor (except for F3AF) or AI-
P lens to operate Multi-Sensor Balanced Fill-Flash. With
other lenses, Center-Weighted or Spot Fill-Flash will be per-
formed.
Automatic aperture/zoom-head adjustment:
AF Nikkor lens (including the latest D-Type) or
Nikkor lens having a built-in CPU
The aperture and zoom-head position in use are auto-
matically set and indicated in the SB-26’s LCD panel.
For other lenses, set manually according to the
shooting situation. See “Setting Aperture Value
(Manual Adjustment),” pages 28 and 29, and “Setting
Zoom-Head Position (Manual Adjustment),” pages 29
and 30.
Before proceeding:
E
ATTACH SPEEDLIGHT TO CAMERA.
E
TURN ON BOTH SPEEDLIGHT AND CAMERA.
E
USE SINGLE-SERVO AUTOFOCUS (S) OR MANUAL
FOCUS (M).
E
USE SINGLE-FRAME SHOOTING (S) FILM ADVANCE
MODE.
Remote TTL Auto Flash operation
The optional SC-17 cord enables you to use the SB-26
off-camera.
When performing 3D Multi-Sensor Balanced Fill-
Flash, remote operation of the SB-26 works properly
only if the SB-26 is placed at a distance and angle
similar to the camera-to-subject distance/angle. 
For other situations, switch to a flash method other
than 3D Multi-Sensor Balanced Fill-Flash.
SB-26 (E)  03.1.14 7:16 PM  Page 36