Nikon SU-800 Benutzerhandbuch

72

Setting a channel number on the SU-800.
Set the communication channel numbers of the 
SU-800 and SB-R200. Press the [SEL](FUNC.) 
button to display the channel number. Press the 
[

W] or [X] button to set the channel number 

(blinking). Press the [SEL](FUNC.) button once 
again and the channel number stops blinking. The 
last channel number to blink is the one that has 
been set automatically.

• Select one of the four available channels. The same 

channel number is set for all groups.

• The channel number blinks during adjustment and 

stops after blinking six times unless an adjustment is 
made. The last channel number to blink is the one that 
has been set automatically.

Setting a channel number on the SB-R200.
Rotate the [CHANNEL] select dial on the SB-R200 
to set the channel number. Be sure to set the 
same channel number as set on the SU-800.

Setting a group on the SB-R200.
Rotate the [GROUP] select dial on the SB-R200 to 
set the group. Once set, the SB-R200 operates 
according to the controls as set on the SU-800.

Compose a picture and shoot with flash.
Confirm that the red ready-lights on the SU-800 
and SB-R200 are on, then release the shutter.

• For details on test firing, refer to page 88.