Canon PIXMA SELPHY CP600 Betriebsanweisung

Seite von 68
20
„
Proper Handling of Paper Cassettes
„
Proper Handling of Paper
Do not apply excessive force to the paper cassette. Force or impact on the cassette may 
result in paper jams or equipment damage.
Do not bend or deform the spring located at the rear of the middle cover of the paper 
cassette.
Do not place any foreign objects in the print output receptacle (on the top of the paper 
cassette).
 This area is for paper only.
If you are not planning to use the printer for a while, remove the paper cassette, close 
the paper cassette’s top cover and store the paper cassette. Also remove the paper 
from the paper cassette and store it horizontally.
Please use only the paper types specified for use by Canon.
Paper must be printed on the glossy side (the side without any printed markings).
Always load paper into the cassette with the glossy side up. Loading the paper the wrong way 
may result in poor print quality, and in some cases may cause damage to the printer.
Do not tear or bend the paper’s perforated edges before printing. Tearing the paper’s 
perforated edges will cause the ink sheet to wind up automatically and waste one print’s 
worth of ink. If this happens, there will not be enough ink left to print all the paper sheets 
included in the kit.
Do not use label sheets on which labels are partially peeled off.
Do not touch the print side of the paper with your fingers. Always hold the paper along 
the edges (outside the perforated border).
Be sure that hands are dry before touching the paper. Sharp objects will scratch the paper 
surface. Keep the paper surface free from fingerprints, dust, water droplets, etc.
Do not write on the paper before printing. Writing on paper before printing on it may result 
in malfunction.
Spring
WRONG
RIGHT