Canon PIXMA SELPHY CP600 Betriebsanweisung

Seite von 68
33
3
Load the paper cassette that 
matches the size of paper you 
want to print and the ink 
cassette.
• The printer enlarges or reduces the size of 
the image according to the paper size and 
sets the print direction to vertical or 
horizontal automatically. The upper, lower, 
left or right portion(s) of the printed image 
may be cut depending on the combination of 
the image size and paper size.
• When you print wide size paper (100 x 200 
mm (4 × 8 in.)), the size of the printed image 
will be the same as the postcard size. You 
cannot do full-size borderless printing.
4
Transmit an image from your 
mobile phone to the printer.
• Aim the mobile phone's infrared port at the 
printer's infrared data receiver and transmit 
the image data to the printer. See the 
illustration on the left for the transmittable 
distance. Note that the distance differs 
depending on the mobile phone model. 
Refer to your mobile phone's manual.
• The printer's indicator blinks green while 
receiving the data. If any error occurs the 
indicator lights green (returns to the original 
state). Check the message appearing on 
the mobile phone display if an error occurs.
• If the data transmission fails, move the 
mobile phone closer to the front of the 
printer's infrared data receiver and repeat 
the procedure.
5
Printing starts after the data transmission is complete.
20 cm or nearer (Do not 
block with any obstacles.)
Effective range (about 10 degrees 
vertically and horizontally).