Canon PIXMA SELPHY CP600 Betriebsanweisung

The printer’s indicator lights red 
without the camera’s LCD 
monitor displaying any error 
message.

There is a malfunction in the 
printer.

Remove the paper from the 
paper-handling slot and take up 
any slack in the ink sheet. Turn 
the printer’s power off and turn it 
on again.

Print quality is not good.

You are not using the correct 
paper type.

Use the designated paper type.

Paper is loaded with the wrong 
side up.

Load the paper correctly. (p. 26)

The ink sheet or paper is dirty.

Use a clean ink sheet and clean 
paper.

Condensation has formed inside 
the printer.

Wait for condensation to 
evaporate. (p. 19)

Printed images are distorted.

The printer is too close to a TV, 
video game machine, or other 
electromagnetic source.

Move the printer so that it is at 
least 1 meter (3.3 ft.) away from 
the electromagnetic source.

The printer is too close to a stereo 
speaker, large motor, or other 
strong magnetic source.

Move the printer away from the 
strong magnetic source.

There is not enough ink left for 
the allotted sheets in the set.

You turned the printer’s power on 
and off repeatedly.

Please avoid turning the printer’s 
power on and off needlessly.

You pulled on the ink sheet.

Do not pull on the ink sheet by 
force.

You tore or bent the paper’s 
perforated edges before printing.

Do not tear or bend the paper’s 
perforated edges.

You removed the ink cassette 
when paper run out while the 
printer was printing more than 
one sheet of paper.

Load paper into the paper 
cassette without removing the ink 
cassette.

Nothing happens when the 
camera’s 

 or SET button is 

pressed.

The printer has overheated.

Wait for the printer to cool down.

Printing is in progress.

Wait for the printer to finish 
printing.

Frequent paper jams.

The paper cassette is overloaded. Do not load more than 18 sheets 

of paper into the cassette.
Do not insert more than 12 sheets 
of wide size paper (100 × 
200 mm (4 × 8 in.)) in the paper 
cassette.

The print output receptacle is too 
full.

Do not allow more than 9 sheets 
to accumulate in the receptacle.

Paper is creased or curled.

Do not use paper that is creased 
or curled.