Canon PIXMA SELPHY CP1200 Betriebsanweisung

44

Selecting an unprotected access point in step 7 and pressing the <o> 

button will display the screen in step 9.

Up to 20 access points are listed. If your desired access point is not listed, 

press the <v> button and select [Manual Settings] in step 6 on 

specify the access point manually. Follow on-screen instructions and enter the 

SSID, security settings, and the password (

).

If WEP security is used and you enter the wrong password in step 8, when 

you press the <o> button and then press the <o> button again after the 

message, you will go to step 9, but printing is not possible. Check the access 

point password and try to connect again, starting at step 3.

On SELPHY, wireless signal strength is indicated by the following icons.  

[

] High, [ ] Medium, [ ] Low, [ ] Weak, [

] Out-of-range

z

z

Press the EDIT button to access the input 

screen, and then enter the password 

z

z

Press the <o> button.

z

z

Once the printer is connected to the 

access point, the screen at left is 

displayed. Check the indicated access 

point name and press the <o> button.

z

z

The screen at left is displayed.