Canon PIXMA SELPHY CP910 Betriebsanweisung

41

z

z

The screen at left is displayed.

Selecting an unprotected access point in step 7 and pressing the <

o> 

button will display the screen in step 9.

Up to 20 access points are listed. If your desired access point is not listed, 
press the <

v> button and select [Manual Settings] in step 6 on 

specify the access point manually. Follow on-screen instructions and enter the 
SSID, security settings, and the password (

If WEP security is used and you enter the wrong password in step 8, when 
you press the <

o> button and then press the <o> button again after the 

message, you will go to step 9, but printing is not possible. Check the access 
point password and try to connect again, starting at step 3.

On SELPHY, wireless signal strength is indicated by the following icons.  
[

] High, [ ] Medium, [ ] Low, [ ] Weak, [

] Out-of-range

z

z

Once you have connected to an access 
point, the printer will automatically 
reconnect to the previous access point 
whenever you turn it on again, and the 
standby screen at left will be displayed.

z

z

If connection fails because the access point is off or for another reason,  
[

] will be displayed. Check access point settings (

).

z

z

Even during standby, you can print images on a memory card by 
inserting the card to access the screen in step 4 on 

z

z

Automatic access point connection at startup can also be disabled 
(

COP

Y