Canon PIXMA SELPHY CP910 Betriebsanweisung
36
Printing from a Computer
Confirming Access Point Compatibility
•
Before you can print via Wi-Fi from a computer, the computer with the
images to send must be connected to an access point.
images to send must be connected to an access point.
•
Use an access point that supports the following Wi-Fi standards. To
check the standards your access point supports, refer to the access point
user manual.
check the standards your access point supports, refer to the access point
user manual.
Standards
IEEE 802.11b/g
Supported
Channels
Channels
1 – 11
Transmission
Methods
Methods
DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g)
Security
No security, 64- and 128-bit WEP (open system authentication),
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and
WPA2-PSK (AES)
•
Confirm that the access point supports WPS (Wi-Fi Protected Setup).
WPS-Compatible Access
Points
Points
Non-WPS Access Points
Or WPS Support Unknown
Or WPS Support Unknown
Check the following information and connect as
described in “Non-WPS Access Points” (
described in “Non-WPS Access Points” (
- Network name (SSID/ESSID)
- Network authentication / data encryption (encryption
- Network authentication / data encryption (encryption
method or mode)
- Password (network key)
* WPS connections are not possible for access points set up for WEP security. Connect
•
If your network is managed by a system administrator, ask the
administrator for network setting details.
administrator for network setting details.
COP
Y