Canon DP-V2410 Handbuch

52

OSD Menu

Item

Setting Options (underline indicates factory default)

Area Marker

"Area Marker" is used to check a specific area using a rectangular box.

Note

"Area Marker" is not displayed in the following cases:

•  When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is

selected

•  When an enlarged image is displayed
•  During the execution of "Playback File" under "Screen Capture"
•  When a "Test Pattern" is displayed

Enable

Switches the area marker On, Off.
On, Off

H Position

Sets the start position (x-coordinate) to draw the rectangle (in increments of 2).
0 to 4086 (240)

V Position

Sets the start position (y-coordinate) to draw the rectangle (in increments of 2).
0 to 2150 (120)

Width (dot)

Sets the width of the rectangle (in increments of 2).
10 to 4096 (240)

Height (dot)

Sets the height of the rectangle (in increments of 2).
10 to 2160 (120)

Mask

Switches the mask color (in the marker).
Black, Half, Off

Line

Turns On/Off the outlines of the rectangular box.
On, Off

Line Width

Sets the width of the area marker line.
Thick, Normal, Thin

Line Color

Sets the color of the area marker line.
White, Red, Green, Blue, Yellow, Cyan, Magenta

Line
Brightness

Sets the brightness of the area marker line.
High, Low