Canon EOS 5DS R Gebrauchsanleitung
257
A Shooting with the LCD Monitor
Set [z5: Live View shoot.] (the [z3]
tab in <A>) to [Enable].
tab in <A>) to [Enable].
Number of Possible Shots with Live View Shooting
(Approx. number of shots)
The figures above are based on a fully-charged Battery Pack LP-E6N and
CIPA (Camera & Imaging Products Association) testing standards.
CIPA (Camera & Imaging Products Association) testing standards.
With a fully-charged Battery Pack LP-E6N, total continuous Live View shooting
time will be as follows: At room temperature (23°C/73°F): Approx. 1 hr. 45 min.,
At low temperatures (0°C/32°F): Approx. 1 hr. 40 min.
time will be as follows: At room temperature (23°C/73°F): Approx. 1 hr. 45 min.,
At low temperatures (0°C/32°F): Approx. 1 hr. 40 min.
Enabling Live View Shooting
Temperature
Room Temperature
(23°C / 73°F)
Low Temperatures
(0°C / 32°F)
Possible shots
220
210
Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
You can also focus by pressing the <p> button.
When flash is used, there will be two shutter sounds, but only one shot
will be taken. Also, the time it takes to take the picture after you press the
shutter button completely will be slightly longer than with viewfinder
shooting.
will be taken. Also, the time it takes to take the picture after you press the
shutter button completely will be slightly longer than with viewfinder
shooting.
If the camera is not operated for a prolonged period, the power will turn
off automatically after the time set in [52: Auto power off] (p.69). If [52:
Auto power off] is set to [Disable], Live View shooting will end
automatically after 30 min. (camera power remains on).
off automatically after the time set in [52: Auto power off] (p.69). If [52:
Auto power off] is set to [Disable], Live View shooting will end
automatically after 30 min. (camera power remains on).
With the HDMI cable HTC-100 (sold separately), you can display the
Live View image on a TV screen (p.351). Note that no sound will be
output. If the picture does not appear on the TV screen, set the [53:
Video system] correctly to [For NTSC] or [For PAL] (depending on the
video system of your TV set).
Live View image on a TV screen (p.351). Note that no sound will be
output. If the picture does not appear on the TV screen, set the [53:
Video system] correctly to [For NTSC] or [For PAL] (depending on the
video system of your TV set).