Canon EOS-1D Gebrauchsanleitung
144
Personal Functions
Beyond Custom Functions, Personal Functions enable you to further customize your camera
settings. They are set with the driver software (bundled) while the EOS-1D is connected to a
personal computer. For details, see “EOS-1D Software Instructions.”
The P.Fn-0 group of Custom Functions can also be registered with the camera alone.
(
settings. They are set with the driver software (bundled) while the EOS-1D is connected to a
personal computer. For details, see “EOS-1D Software Instructions.”
The P.Fn-0 group of Custom Functions can also be registered with the camera alone.
(
→p.140)
Personal Functions
P.Fn No.
Description
00
Custom Function group registration.
01
Disables the shooting modes.
03
Specifies the metering mode for manual exposure.
04
Sets the maximum and minimum shutter speeds to be used.
05
Sets the maximum and minimum apertures to be used.
06
Registers and switches the shooting mode and metering mode.
07
Repeats bracketing during continuous shooting.
08
Sets the number of shots to be bracketed.
09
Changes the bracketing sequence for C.Fn-09-2/3 to increased exposure, stanadrd
exposure, and decreased exposure.
exposure, and decreased exposure.
10
Retains the shift amount for program shift.
11
Unused.
12
Unused.
13
Executes AI Servo AF continuous shooting giving priority to the drive speed.
14
Disables focus detection (search driving) by the lens drive.
15
Disables the AF-assist beam from being emitted.
16
Enables automatic shooting when focus is achieved at the fixed point of focus while
the shutter button is pressed fully.
the shutter button is pressed fully.
17
Disables automatic AF point selection.
18
Enables automatic AF point selection when C.Fn-11-2 has been set.
19
Sets the continuous shooting speed.
20
Limits the number of frames during continuous shooting.
21
Enables quiet operation when the shutter button is OFF after picture-taking.
22
Unused.
23
Changes the timer’s time length.
24
Illuminates the LCD panel during bulb exposures.
25
Sets the default settings when the CLEAR (
+
) button is ON.
26
Unused.
27
Enables the electronic dial’s function to be used in the reverse direction.
28
Prevents exposure compensation with the Quick Control Dial.
∗
About P.Fn-11, 12, 22, and 26
In order to have the EOS-1D’s P.Fn numbers (0 to 28) match the EOS-1V’s as much as
possible, the Personal Functions in the EOS-1V which are not provided in the EOS-1D have
been left blank in the EOS-1D.
In order to have the EOS-1D’s P.Fn numbers (0 to 28) match the EOS-1V’s as much as
possible, the Personal Functions in the EOS-1V which are not provided in the EOS-1D have
been left blank in the EOS-1D.
02
Disables the metering modes.